Home View Cart Check Out Order Status Contact Us

Alphabeteic List: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


 Product Search 
  Category  
Salts
Acids
Bases
Oxides
Metals
Reagents
Polymers, Resins
Glassware
Lab Supplies
Chemistry
Lab Equipment
Waxes

  Cart Summary  
Empty Cart!
 
 Web design/ hosting!
QuickLinK
Side.net

To contact us by phone,
call 202-800-8852.
Forward questions or comments to Info@ChemicalStore.com

Metals

Copper Powder, Super fine, Spherical
Copper Powder, Super fine, Spherical
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU112SP $28.00 & Up

 

Iron Powder, Coarse, Mesh 20
Iron Powder, Coarse, Mesh 20
IRON12 is a special coarse iron powder with spongy structure produced from high purity iron ore by hydrogen reduction method. It is recommended for ground remediation and filtration of certain air or gas contamination. IRON12 can also be used as a source of high purity iron for chemical reactions.
Apparent density is between 1 and 1.5 g/cc.
Product Code: IRON12 $3.50 & Up

 

Copper Powder 99.3%
Copper Powder 99.3%
Copper powder, high purity, water atomized, hydrogen reduced ultra fine copper powder with spheroidal particles and clusters. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU301 $23.00 & Up

 

Iron Powder, Carbon Steel Powder
Iron Powder, Carbon Steel Powder
This is a black iron powder. Imported from China. It is Mesh 145. High Apparent Density. Attracts by magnets. Can rust. May also be used as a compound of sparklers and firework products.
This product is very clean. It appears to be made by atomization of black carbon steel.
Product Code: S145C $10.00 & Up

 

Silver Powder, fine spheres, >99%
Silver Powder, fine spheres, >99%
Fine silver powder 3-8 micron with spherical particles for alloy production, chemical applications, Silver clay and more.
Product Code: AGS8 $32.00 & Up

 

Nickel Flake 18 micron average
Nickel Flake 18 micron average
Fine nickel powder flaked grade 50 is an irregular-shaped platelet with high average aspect ratio ideal for a range of applications such as Anti-seize lubricants, Conductive coatings, Pigments and binders.

Average Diameter: 17.9 m
Average Thickness: 1.6 m
Average Aspect Ratio: 15.5
Apparent Density: 2.1 g/cm3
Morphology: Irregular platelets
Product Code: NIF50 $12.00 & Up

 

Soft Magnetic Iron Powder
Soft Magnetic Iron Powder
SM1001 is an ultra pure soft-magnetic iron powder used to manufacture electromagnet cores, transformer cores and other soft magnetic P/M parts that require high magnetic permeability, high induced magnetization and low coercive force. Apparent density is about 2.92, purity is more than 99%, U.S. Mesh size = about 100.
Product Code: SM1001 $15.00 & Up

 

Iron Powder, Mesh 200
Iron Powder, Mesh 200
IRON200C is a high carbon medium density chemically uniform granulated iron powder. IRON200C is low in sulfur, phosphorous and other alloying elements. The Apparent density is 3.3 g/cm3.
Product Code: IRON200C $450.00

Special Order, Please Call Us!

 

Magnesium Sheet, 8" x 5"
Magnesium Sheet, 8" x 5"
Magnesium Sheet, General purpose, high strength to weight ratio. Contains about 95% magnesium. The remaining 5% is mainly aluminum and zinc that improve the physical property of the product.
It is cut to 8" x 5" (125mm x 205mm) and the thickness is 0.04 inch (1 milimeter).
Product Code: MGSHEET $6.00 & Up

 

Copper Powder, Flaked, Waxed, Pigment
Copper Powder, Flaked, Waxed, Pigment
Art grade copper powder with metallic shine for making metallic inks and paints. CU7005F is miscible and compatible with most resins including polyurethane, polyacrylic, polyester and drying oils such as linseed oil. It can also be mixed with conductive resins to make conductive ink.
Pictures show shells painted with CU7005F copper powder.
Product Code: CU7005F $22.00 & Up

 

Zinc Electrode, Flat
Zinc Electrode, Flat
Zinc Electrodes are sheets of high purity zinc metal cut to the size 5 x 3/4 inches (about 19mm x 125mm) and are generally used as zinc electrodes in electricity and chemistry experiments. Each electrode is stamped with letters "Zn" for ease of identification. The thickness of zinc electrodes are 0.75mm up to 1mm.
Product Code: ZNFLAT $2.75 & Up

 

Silver Powder, Fine flake >99%
Silver Powder, Fine flake >99%
High purity silver powder flake, D50 - 8 Micron, for conductive ink or conductive paint and art applications.
Old product code: HR410S
Product Code: AGF8 $39.00 & Up

 

Steel Powder Clumps
Steel Powder Clumps
Steel powder rusty clumps is a low cost iron powder/steel powder that has clumped due to pressure and weathering.
May be used in manufacturing iron salts or to increase the iron content of the soil.
Product Code: SCLUMPS $600.00

 

Copper Granules, Mesh 20 (Coarse Copper Powder)
Copper Granules, Mesh 20 (Coarse Copper Powder)
Coarse copper powder is made of solid metalic high purity copper metal. Particles are almost in equal size with appearance of metalic spherical crystals.
Recomended for wood inlay, art and industrial applications where solid round multi-side balls may be used.
CAS No.: 7440-50-8
Product Code: CU23HP $25.00 & Up

 

Copper Granules, 10 mesh (Coarse Copper Powder)
Copper Granules, 10 mesh (Coarse Copper Powder)
Coarse copper powder is made of solid metalic high purity copper metal. Particles are almost in equal size with appearance of metalic spherical crystals.
Recomended for wood inlay, art and industrial applications where solid round multi-side balls may be used.
CAS No.: 7440-50-8
Product Code: CU12HP $25.00 & Up

 

Copper Powder, Fine, Spherical
Copper Powder, Fine, Spherical
CU118SP is a fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Product Code: CU118SP $26.00 & Up

 

Titanium Electrode, Flat
Titanium Electrode, Flat
Titanium Electrodes are sheets of high purity Titanium metal cut to the size 5 x 3/4 inches (about 19mm x 125mm) and are generally used as Titanium electrodes in electricity and chemistry experiments. Each electrode is stamped with letters "Ti" for ease of identification. The thickness of Titanium electrodes are about 0.5 mm up to 1mm.

See electrodes of other metals.

Product Code: TIFLAT $8.00 & Up

 

Iron Granules for plants
Iron Granules for plants
SOILIRON is a soil additive containing slow release, highly concentrated Iron nutrient. It is a mixture of Iron dust, powder, granules and clumps that can easily mix with the soil or stay on the surface.
Product Code: SOILIRON $10.00

 

Copper Powder 99.8%, Electronic Grade, Mesh 325
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade Copper powder, high purity, water attomized, hydrogen reduced ultra fine copper powder with spheroidal particles. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU301-E $25.00 & Up

 

Sheets of Lead Metal
Sheets of Lead Metal
Lead sheet metal in different sizes for electrode, chemical and medical applications including X-Ray and Nuclear radiation shielding.
Product Code: LEADSHEET $27.00 & Up

 

Tin Powder, 99.5%+
Tin Powder, 99.5%+
Super fine, high purity tin powder, 325 Mesh, Apparent Density =3 g/cc up to 3.5 g/c. Special order. Ships out in 7 days.
May be used for Metal Injection Molding (MIM) applications.
Product Code: SN301 $25.00 & Up

 

Metal Electrodes, Set of 8
Metal Electrodes, Set of 8
For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and Magnesium.
WARNING: Metal electrodes have sharp edges. Not a toy!. Handle with care.
Product Code: METELECT8 $12.00 & Up

 

Iron Powder, super fine
Iron Powder, super fine
Super fine hydrogen reduced iron powder for pigment, sintered products, Powder metallurgy, chemical reactions, Soft magnetic composite compounds, magnetism experiments, fingerprinting powder and making magnetic paints.
Product Code: IRON325 $16.00 & Up

 

Iron Powder
Iron Powder
High purity, hydrogen reduced, highly reactive, high surface area, fine iron powder for chemical reactions, magnetism experiments and making magnetic paints. All particles are 150 micron or smaller.
Product Code: IRON100 $10.00 & Up

 

Copper Powder 99.5% - 99.9%
Copper Powder 99.5% - 99.9%
Very high purity, air atomized, hydrogen reduced ultra fine copper powder. Spherical particle. High conductivity. High Density.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU155A $28.00 & Up

 

Iron Powder, Ultra pure 99.5%
Iron Powder, Ultra pure 99.5%
High purity fine iron powder made of high purity iron by water atomization method. Apparent density > 2.8, medium particle distribution.
Product Code: FE100.29 $16.00 & Up

 

Copper Powder 99.3%, General Purpose, 150 Mesh
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by water atomization method followed by hydrogen reduction. Applications include production of copper compounds, catalyst in chemical formulations, abrasive wheels, carbon brushes, and more.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU165 $28.00

 

COPPER POWDER > 99% (150 - 325 Mesh)
COPPER POWDER > 99% (150 - 325 Mesh)
General purpose, highly pure >99% copper powder made from electrolytic copper. Mesh 150 - 325 Granular Copper.
Product Code: CUPDR $3.99

 

CADMIUM STICK
CADMIUM STICK
Cadmium 99.9% metal stick, 1/2" DIA X 9" LENGTH. Weighs about 225 grams.
Product Code: CADSTICK $25.00 & Up

 

MAGNESIUM STICK
MAGNESIUM STICK
99.8% MAGNESIUM. 1 LB STICK 1.3" (32mm) dia x 12" (300mm) long. May be used to make magnesium parts or magnesium alloys.
Product Code: MAGSTICK $35.00 & Up

 

Metal Cylinder Set (6 Pieces)
Metal Cylinder Set (6 Pieces)

Perfect for science enthusiasts, collectors, or science experiments. With these metal cylinders you can find and compare metal density or study the different properties of metals.

Available in 30mm and 40mm lengths and 10mm diameter.
Product Code: METCYLSET6 $9.00 & Up

 

Magnesium Electrodes Flat and Coil
Magnesium Electrodes Flat and Coil
Combination set of magnesium electrodes includes 2 flat electrodes and 2 coil electrodes made of high purity magnesium metal. Flat electrodes are stamped with letters Mg to identify the electrode type..
Magnesium electrodes may be a valuable addition to your collection of metals.
Product Code: MG_2_2 $15.00

 

Magnesium Electrode Coil
Magnesium Electrode Coil
Magnesium electrode coil is made of high purity magnesium strip formed as a coil in order to provide a larger surface contact with electrolyte.
Magnesium coil may be a valuable addition to your collection of metals.
Product Code: MGCOIL $8.00 & Up

 

Magnesium Electrode Flat
Magnesium Electrode Flat
Magnesium electrode flat is made of high purity magnesium metal cut in a rectangle shape and may be stamped with letters Mg to identify the electrode type..
Magnesium electrode may be a valuable addition to your collection of metals.
Product Code: MGFLAT $1.10 & Up

 

Copper Electrodes, Flat
Copper  Electrodes, Flat
These copper (Cu) metal electrodes are made of high purity copper metal. Each copper electrode is stamped with letters "Cu" for easy identification. Copper electrodes are used for science experiments such as demonstration of Lenz’s law, making a voltameter, make electricity from fruits, and making electricity using other chemical reactions.
Copper electrode sheets are always a valuable addition to your collection of metals.
CAUTION: Metal electrodes have sharp edges.
Product Code: CUFLAT $2.75 & Up

 

Tin Metal, Shots, 8 mesh, 227 grams
Tin Metal, Shots, 8 mesh, 227 grams
Pack of 227 grams (1/2 Lbs) 8 mesh tin shots. These high purity Tin (Sn)pieces may be used in chemistry experiments, metallurgy experiments. Easily melts and can be used for soldering or as a protective layer on other metals. .
Tin shots may be a valuable addition to your collection of metals.
Product Code: TINSHOT $12.50

 

Bi, Bismuth Pellets, 99.99% Pure
Bi, Bismuth Pellets, 99.99% Pure
Bismuth (Bi) Pellets, 99.99% pure, Each pellet is 10 grams. .
Bismuth Pellets can be a valuable addition to your collection of metals.
Approximate pellet size is OD:18mm, H:3mm
Product Code: BIPELL $0.78 & Up

 

Iron Electrode (Iron sheet metal)
Iron Electrode (Iron sheet metal)
Iron electrodes measure 19mm x 125mm x 0.5mm (5" x 3/4" x 1/32"). Made of low carbon iron sheets and packed in sets of 2 for chemistry and physics experiments where iron is required.
Iron electrodes can be a valuable addition to your collection of metals.
Product Code: IRON2 $4.00

 

Lead Metal Wire, 5 foot coil
Lead Metal Wire, 5 foot coil
This lead (Pb) wire has a 1/8" diameter and is 5 feet long. Lead is a very soft metal and for this reason is fun to play and experiment with. .
Lead Wire may be a valuable addition to your collection of metals.
Product Code: LEADWIRE $10.00 & Up

 

Copper Powder, 99.5%, Mesh 100
Copper Powder, 99.5%, Mesh 100
High purity copper powder, nominal mesh 100, Apparent density: 2.6 g/cc, Copper > 99.5%, with irregular shape particles. Used in powder metallurgy. May be admixed with other metal powders and graphite for specific properties such as strength, hardness and wear resistance for structural parts.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU264 $28.00 & Up

 

Metal Collection Set of 6
Metal Collection Set of 6
This metal collection features six very common and useful metals. Each of the metals has unique properties and is used for certain applications. These metals can be used for educational, scientific and research applications.
Product Code: METCOL $35.00

 

Lead Metal Rod, 18" x 1/4"
Lead Metal Rod, 18" x 1/4"
High purity rod is good for collection, experimentation or application. .
Lead rod can be a valuable addition to your collection of metals.
Product Code: LEADROD $6.00 & Up

 

Magnesium Ribbon
Magnesium Ribbon
30 grams roll of Magnesium (Mg) Metal Strip, thickness 0.03mm, about 500 inches long. For combustion experiments.
Flammable solid.
Product Code: MGRIB $12.99

 

Metal Electrodes Set of 11
Metal Electrodes Set of 11
For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.
This is the most complete collection of metals offered by MiniScience. All metal electrodes are stamped with 2 letter identification code for easy identification.
WARNING: Metal electrodes have sharp edges
Product Code: METELECT11 $25.00

 

Bronze Powder, Filter Grade 40
Bronze Powder, Filter Grade 40
BZ40P is a spherical particle bronze developed to satisfy the needs of the high reliability metallic filter market, this material is adaptable to an expanding range of applications. Its fully alloyed and has a closely controlled particle size range of -100+230.
Other applications include: Resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc.
Product Code: BZ40P $32.00 & Up

 

Carbonyl Iron Powder
Carbonyl Iron Powder
CIPMS is Carbonyl Iron Powder/ Zero Valent Iron powder in the form of microspheres in the range of 3 to 10 microns. The special technology used to manufacture CIPMS allows production iron microspheres at purity of 99.5% or more.
Carbonyl Iron Powder is an exceptional fine iron powder with outstanding magnetization behavior. Applications include metal injection molding, Inductive electronic components, Microwave Absorption, magnetic ink, magnetic plastic parts.
Limited Quantity Product. Only ship to the US lower 48 states and Canada.
Product Code: CIPMS $35.00 & Up

 

Copper Powder 99.3%, General Purpose, 150 Mesh
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by water atomization method followed by hydrogen reduction. Applications include production of copper compounds, catalyst in chemical formulations, abrasive wheels, carbon brushes, and more.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU165Q $120.00 & Up

 

Steel Powder, Iron Powder, Mesh 70
Steel Powder, Iron Powder, Mesh 70
Carbon Steel powder / Hard Iron powder mesh 70 is a relatively coarse iron/steel powder for a wide range of applications including abrasives, sintered products, or any other use where a coarse steel poeder is needed.
No COA is available for this product..
Pay as low as $1.25/lb for special orders of 3000-Lb or more.
Also known as Black Iron Powder and Iron Filing.
Product Code: S70 $25.00 & Up

 

Titanium Rod, Comercial Grade 2
Titanium Rod, Comercial Grade 2
These titanium (Ti) Rods are high quality and high purity (commercial grade 2). Each rod is 11" in length with a 1/8" diameter and comes in packs of 1 to 10.
Titanium rods may be a valuable addition to your collection of metals.
Product Code: TIROD $2.50 & Up

 

Zinc Powder (Granulated Zinc Metal, Mesh 20)
Zinc Powder (Granulated Zinc Metal, Mesh 20)
Irregular shaped fragments of zinc. In addition to the alkaline battery industry, our Zinc Powder is also used in other applications such as friction materials, spray galvanizing, gold extraction, silver extraction, chemical production and mechanical coating. Zinc Powder also has application in manufacture of Zinc rich Paint formulation and in manufacture of chemicals like Zinc Phosphide, Sodium Hydrosulphite etc.
Product Code: ZINC20 $12.00 & Up

 

Copper Powder, Mesh 400
Copper Powder, Mesh 400
Highly pure >99% SPHERICAL COPPER POWDER MADE USING INERT GAS ATOMIZATION. Mesh 400 Spherical Copper.

HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU630 $43.00 & Up

 

Graphite Powder, Micronized Flake, 95+%
Graphite Powder, Micronized Flake, 95+%
Micronized flake natural graphite powder (5 Micron) .
GRPM5 is a natural graphite with more than 95% carbon content, ground to a fine powder with average particle size of about 5 micron.
Applications include: Lubrication (cold and hot), Lubricant pastes, and Conductive pastes.
used in powder metallurgy for alloy and sintering control.
CAS# Graphite: 7782-42-5
CAS# Carbon: 7740-44-0
Sold by weight or volume.
Product Code: GRPM5 $12.00 & Up

 

Bronze Powder, Spherical, Dark
Bronze Powder, Spherical, Dark
Prealloyed high density spherical bronze powder is developed for specialized applications, including flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels and cutting tools, and metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM) and high strength applications.
Bronze powder is also used in resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc.
Product Code: BZ5890 $32.00 & Up

 

Zinc Plates/ Electrodes
Zinc Plates/ Electrodes
We cut any lenghth from a roll of zinc that is 6" wide. They are approximately 0.75 mm thick, and have high quality, high purity and gray surfaces.
Product Code: ZINCPL $8.75 & Up

 

Nickel Pellets, Electrolytic Grade
Nickel Pellets, Electrolytic Grade
Nickel Pellets are electrolytic grade and have a very high purity of at least 99.9%. They are suitable for chemical reactions as well as making special alloys. The diameter of the pellets are 6mm up to 18mm (1/4" up to 3/4").
Product Code: NICKELP $10.00 & Up

 

Bronze Powder, Spherical, Light
Bronze Powder, Spherical, Light
Prealloyed high density spherical bronze powder is developped for specialized applications, including flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels and cutting tools, and metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM) and high strength applications.
Bronze powder is also used in resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc.
Product Code: BZ5657C $24.00 & Up

 

Steel Powder, Iron Powder, Mesh 100
Steel Powder, Iron Powder, Mesh 100
Coarse steel powder mesh 100 is an imported Iron -Steel powder. Some packages are damaged and we will repackage them before shipping. This product may have some contaminations caused by repackaging from broken paper bags into the plastic or metal pails. May be used for soil, concrete, sculpture or as a substitute to the cast iron powder.
No COA is available for this product.
Pay as low as $1.25/lb for special orders of 3000-Lb or more. Please call for special pricing.
Also known as Black Iron Powder and Iron Filing
Product Code: S100 $25.00 & Up

 

Bronze Powder, Filter Grade 25
Bronze Powder, Filter Grade 25
BZ25P is a spherical particle bronze developed to satisfy the needs of the high reliability metallic filter market, this material is adaptable to an expanding range of applications. Its fully alloyed and has a closely controlled particle size range of -200+325.
Applications include: Resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc.
Product Code: BZ25P $32.00 & Up

 

Steel Powder, Iron Powder
Steel Powder, Iron Powder
S1001 is a highly compressible, water-atomized steel powder designed for high density, high strength powder metallurgy and powder forging applications.
Due to its superior compressibility, S1001 can be single pressed to 7.2 g/cm3, or repressed to densities up to 7.4 g/cm3. Higher compressibility extends the performance level of P/M parts; Provide enhanced compaction capability; Provides higher strength and higher density.
Category: Iron Powder, Metal Powder
Product Code: S1001 $12.00 & Up

 

Copper Powder (coarse)
Copper Powder (coarse)
High purity atomized copper powder -40/+100 US Meash has the largest grains in compare with our other copper powder products.
Minimum purity : 99.0%
Typical Apparent Density: 2.4
Nominal Mesh: -40/+100
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Product Code: CU41 $25.00 & Up

 

High purity food grade iron powder
High purity food grade iron powder
IRON195SP is a fine, high purity iron powder for food or feed additive applications. IRON195SP is a mesh 200 product with spherical particles.
For Manufacturing and Industrial Use Only.
Product Code: IRON195SP $18.00 & Up

 

High purity iron dust
High purity iron dust
IRONT414 is a high purity iron dust that is even finer than the super fine iron powder. It is usually more than 98% pure and has an apparent density of about 1.8 g/cm3.
Product Code: IRONT414 $800.00

 


Search Products:

Looking for Chemicals ?
Please Visit
ChemicalStore.Com!

  Best Sellers

Universal pH Paper

Home | Privacy Policy | Terms & Conditions | Return Policy | Track My Order

Copyright 2017 Chemical Store Inc.