Selvol 205 is a low viscosity, easy to dissolve polyvinyl alcohol generally used as a stiffener or sizing agent for textile and paper.
Viscosity of a 4% solution is 5.2 up to 6.2 cps.
In Stock
Appearance....... Off white granular solid
Refractive Index nD20ºC ...... 1.52 -1.55
Specific gravity ............ 1.27 - 1.31
Specific heat (J/g K) ....... 1.65 - 1.67
Thermal conductivity (W/m C) ......... ~2
Mean coefficient of thermal expansion at 0-45ºC (x 10-5 / ºC) ... 7-10
ESTERGL90 is the glycerol ester of pine rosin with softening point of about 90°C.
It is a pale thermoplastic resin with exceptional resistance to oxidation. It is used as a tackifying resin component in various adhesives, inks, coatings, and personal care compositions where oxidative stability is needed.
Applications:
Adhesives and sealants: pressure sensitive, hot melt, solvent, and
emulsion
Specialty tapes and labels
Inks, coatings, lacquers
Rubber and plastics modification
Cosmetics, depilatory waxes
INCI Name: Glyceryl Rosinate
CAS Number: 65997-13-9 / 8050-31-5
EINECS/ELINCS No: 266-042-9 / 232-482-5
COSING REF No: 34100
Chem/IUPAC Name: Resin acids and Rosin acids, esters with glycerol
55-lb bags usually ship within 7 days. Other sizes ship same day.
ESTERGL100 is the glycerol ester of pine rosin with softening point of about 100°C.
It is a pale thermoplastic resin with exceptional resistance to oxidation. It is used as a tackifying resin component in various adhesives, inks, coatings, and personal care compositions where oxidative stability is needed.
Applications:
Adhesives and sealants: pressure sensitive, hot melt, solvent, and
emulsion
Specialty tapes and labels
Inks, coatings, lacquers
Rubber and plastics modification
Cosmetics, depilatory waxes
INCI Name: Glyceryl Rosinate
CAS Number: 65997-13-9 / 8050-31-5
EINECS/ELINCS No: 266-042-9 / 232-482-5
COSING REF No: 34100
Chem/IUPAC Name: Resin acids and Rosin acids, esters with glycerol
55-lb bags usually ship within 7 days. Other sizes ship same day.
Polyvinyl Alcohol grade 22-88 is a water- soluble polymer manufactured by alcoholysis of polyvinyl acetate. The Viscosity of a 4% solution of this product is about 22 cps.
Uses as a binder in sizes due to the good penetration capacity and good adhesion properties on all types of fibrous material.
The excellent film characteristics of PVOH like high cohesion and toughness, low electrostatic charging and redissolving capacity of the dried film in water.
PVOH possesses remarkable barrier properties. Due to its insolubility in most organic solvents surfaces treated with PVOH repel oil, grease and fat.
Furthermore, PVOH displays excellent mechanical strength properties if applied as a film on paper or paperboard.
Therefore it fits well as a surface sizing agent. Many special paper grades are produced using PVOH.
OVOH is an outstanding carrier for optical brightening agents and pigments.
Natural rock rosin from pine trees of Brazil is excellent for production of rosin powder, baseball rosin bags, rosin stick and many other grip improving products. Also used in printing inks, varnishes, adhesives/glues, soap, paper sizing, soda, soldering fluxes, and sealing wax.
The entire 55-lb bag of this product is often one large solid chunk, but it can easily be crushed to smaller pieces for packaging or production. Image shows a clean chunk immediately after braking a larger chunk.
Grade: WG
Acid Value: 155 - 170 KOH/g
Color: Pale yellow/ Amber to Brown
Discontinued. Please order crushed brazilian rosin with product code BROSIN or Honduran rosin with product code HROSIN.
PVOH 62-99 is a high viscosity, fully hydrolized polyvinyl alcohol designed to provide high films with exceptional high tensile strength and tear resistance, with excellent resistance to oil, grease, petroleum hydrocarbons and other common solvents.
Polyvinyl Alcohol grade 62-99 is equivalent to Selvol™165, Elvanol 70-62, PVOH 70-62, Poval 60-98. It is also similar to Poval 56-98.
Xanthan gum is a unique hydrocolloid with exceptional rheological behaviour. It is a creamy white powder that dissolves readily in hot or cold water to form highly viscous, colloidal solutions, suspensions or gels at low concentrations.
Xanthan gum is used as a stabiliser, emulsifier, thickener, suspending agent and bodying agent in food applications such as salad dressings, sauces, instant products, desserts, bakery dairy products, and fruit juices as well as in the formation of various low-calorie foods. Cosmetic and pharmaceutical applications of xanthan gum include the use in tooth pastes, lotions, shampoos and formulations such as tablets. Typical industrial applications of xanthan gum is the use in cleaners, paints, ceramic glazes, inks and oil drilling fluids.
Xanthan Gum
CAS Registry Number: [11138-66-2]
EC NO.: 234-394-2
Chemical Formula: (C35H49O29)n
E-Number: E415
COA can be ordered online using the product code DOCUMENT.
Natural Rosin, powdered.
Used as a grip-improving powder. Apply to athletes’ hands or soles of basketball shoes for improved traction. Dust on handles of baseball and softball bats for improved grip.
Glycerol Ester of Gum Rosin ESTERG85 is a slight yellow transparent solid, which is made from gum rosin
or refined gum rosin through esterification with glycerol; it is a good tackifying resin.
Application:
EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on
SIS or SBS. Adhesive, emulsion and paints based on NR and CR.
This product is also available in food grade with product code of ESTERG85E in order to be used as emulsification stabilizer for drinks, and as chewing ingredient for chewing gum & bubble gum.
EVA: Ethylene-vinyl acetate
SIS: styrene-isoprene-styrene
SBS: Styrene butadiene styrene
Pentalyn® H is a hard, pale amber, thermoplastic resin designed primarily as a tackifying resin for various types of polymer and elastomer based adhesives. It is a pentaerythritol ester of wood rosin that has been stabilized by hydrogenation. In finished products, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack imparting properties than ordinary rosin esters.
Applications:
Tackifier in pressure-sensitive adhesives needing heat, light, oxidation, and moisture resistance
Readily formulated into solvent and hot-melt type adhesives
Tackifier for natural rubber, neoprene and SBR latex based adhesives
Also used in the following products: lubricants and greases, coating products, adhesives and sealants, anti-freeze products, biocides (e.g. disinfectants, pest control products), fillers, putties, plasters, modelling clay, finger paints and polishes and waxes.
Polyterpene resin is a pale, inert thermoplastic hydrocarbon resin with a low molecular weight.
This specific grade known as Piccolyte S 115, is produced from high purity beta-pinene isolated from turpentine, is characterized by its light color and color stability, low odor, and an excellent balance of adhesive and cohesive properties.
It is an outstanding tacki?er for natural rubber and is designed primarily for use in pressure-sensitive adhesives, hot-melt adhesives, coatings, and rubber compounding.
Applications:
Tackifier resin in pressure-sensitive and hot melt adhesives
Modifer resin for rubber compounds
Wax modifier for investment castings
Used as a stiffening and waterproofing agent in textile sizing applications
Component in SBR-based can sealants
VESTENAMER® is a semicrystalline rubber that is also described as a trans-polyoctenamer rubber (TOR).
It acts as a plasticizer of rubber compounds in mixing and manufacturing processes. In the vulcanization of rubber parts, it participates in crosslinking and, as an elastomer,
it is fully incorporated into the network.
Maleic Resin is a resin derived from rosin, modified with maleic anhydride, and partially esterified with glycerin.
It can be applied in the manufacture of flexographic inks, paper inks, printing inks, varnishes, synthetic enamel, steam set, and road marking inks.
Fumaric Resin is a resin derived from rosin, modified with fumaric acid and partially esterified with glycerin.
It can be applied in the manufacture of: flexographic inks, paper inks, printing inks, varnishes, synthetic enamel, steam set and road marking inks.
Rosin Talcum blend is a fine powder containing about 80% natural dry pine rosin and about 20% Talcum Powder. This blend is a special order product and will be produced per order. Lead time is 2 weeks. Warning: Breathing talcum powder dust is claimed to be a cause of cancer.
This product is usually packaged in plastic bags and ships in cardboard boxes. Depending on the order quantity or customer requirements it can be packaged in plastic jars or plastic pails.
Storage: Store in sealed containers. Avoid exposure to heat and direct sunlight.
Shelf life: about 1 year from the shipping date.
Gum Arabic is a natural gum originally consisting of the hardened sap of two species of the Acacia tree.
Gum Arabic is a complex mixture of glycoproteins and polysaccharides, predominantly polymers of arabinose and galactose. It is soluble in water, edible, and used primarily in the food industry and soft-drink industry as a stabilizer, with E number E414 (I414 in the US). Gum arabic is a key ingredient in traditional lithography and is used in printing, paint production, glue, cosmetics, and various industrial applications, including viscosity control in inks and in textile industries.
Gum Arabic is a rich source of dietary fibers and in addition to its widespread use in food and pharmaceutical industries as a safe thickener, emulsifier, and stabilizer, it also possesses a broad range of health benefits that have been evidently proved through several in vitro and in vivo studies.
Coumar resin also known as Coumarone-Indene Resin is a thermoplastic low molecular weight, hydrocarbon resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.
While coumar resins can be liquid or solid, this grade is in the form of solid flakes with softening point of about 130ºC.
Coumar resin is soluble in organic solvents such as chlorinated hydrocarbons, esters, ketones, ethers, hydrocarbons, most resin oils, nitrobenzene, anilines, etc., but insoluble in water and lower alcohols. Excellent acid and alkali resistance and water resistance. Good electrical insulation, aging resistance, and heat resistance. Shows a neutral reaction. It has thermoplasticity and corrosion resistance. The light fastness is poor, Combustible, Non-toxic.
Coumarone resin is widely used in rubber, tires, triangle belts, conveyor belts, paint, ink, waterproof, hose and other industries.
Glycerol Ester of Gum Rosin ESTERG85E is a slight yellow transparent solid, which is made from refined gum rosin through esterification with food grade glycerol; it is a good tackifying resin. Lots of this product are being tested for heavy metals and hazardous elements to ensure usability for food related applications. Application:
Used as basic material for gum base with the property of easily becoming bubble and resisting chewing. It can act as anti-oxidant and keeping soft and with good taste in bubble gum and chewing gum. It can be also used as emulsification stabilizer in soft drinks.
used as a clouding agent and as a “weighting agent” to adjust the density of citrus beverage flavor concentrates.
Microcrystalline Cellulose is a purified, partly depolymerised cellulose with shorter, crystalline polymer chains. Its strong binding performance make MCC one of the most commonly used excipients (diluents, fillers and binders) in drug formulations. The product is manufactured by controlled partial hydrolysis of high purity wood pulp, followed by purification and drying.
MCC is widely used in diverse pharmaceutical processes, like wet granulation, dry granulation or direct compression.
Particle Size Distribution:
D10: 20-50 um
D50: 90-150 um
D90: 190-300 um
Grade: USP/NF/KOSHER in 55-Lb bags/boxes
Keyword: Cellulose Powder
Poly vinyl alcohol, high viscosity (49 cps for a 4% solution) and partially (88%) hydrolyzed.
This product is equivalent to PVOH5042, Elvanol® 50-42, SELVOL 540 and POVAL 49-88). PVOH4988 can dissolve in cold water (Heating or warm water is suggested for complete dissolving).
A solution of 4% provides the maximum viscosity of 47 CPS.
It offers high tensile strength and tear resistance. It is an excellent dispenser and stabilizer. PVOH 49-88 is suggested for evaluation in the stabilization of vinyl acetate, polystyrene and polyvinyl chloride emulsions. It has additional applications in re-moisturizing adhesives, temporary binder for ceramics, water-soluble film; paper adhesives, cold-water soluble film, photosensitive coatings, binder for joint compounds and texture coatings and as a soil anti-re-deposition agent. Used to make slime.
Industries: Paper, Adhesives, Personal Care, Oil & Gas, Emulsion, Construction, Textile.
ESTERG785 is the glycerol ester of highly hydrogenated rosin.
It is a pale thermoplastic resin with exceptional resistance to oxidation. It is used as a tackifying resin component in various adhesives, inks, coatings, and personal care compositions where oxidative stability is needed.
Applications:
Adhesives and sealants: pressure sensitive, hot melt, solvent, and
emulsion
Specialty tapes and labels
Inks, coatings, lacquers
Rubber and plastics modification
Cosmetics, depilatory waxes
INCI Name: Glyceryl Hydrogenated Rosinate
CAS Number: 65997-13-9
55-lb bags usually ship within 7 days. Other sizes ship same day.
Natural Dammar gum resin crystals obtained from Shorea trees in Indonesia (Sumatra).
White to yellowish-white translucent, globular to pear-shaped grains, irregular fragments or stalactite masses. Grade AA consists of larger pieces of 2 to 5 centimeter. Grade A consists of 1/2 cm to 5 cm pieces as well as about 5% resin powder. Grade B particles are mainly smaller than 1 cm and include about 20% powdered resin.
Used in incense, varnish and other products. Commonly used in oil painting, both during the painting process and after the painting is finished. Dammar crystals are also dissolved in molten paraffin wax to make batik, to prevent the wax from cracking when it is drawn onto silk or rayon.
Damar crystals are dissolved into beeswax with pigment added to harden it in order to make encaustic paints.
Dammar resins were often used in the past to caulk ships, frequently together with pitch or bitumen.
Low molecular weight polyethylene powder is used to aid pigment dispersion and mold release, to improve scuff resistance in inks and increase tensile strength in wax blends. It is a wax hardener for lower melting point waxes. This product is a low density polyethylene powder and is easy to melt blend with natural and synthetic waxes. Often used for wax modification.
Penetration hardness: 5 dmm
Melting Softening Point: 104 - 108 °C
Brookfield Viscosity @ 125°C: 350-500 cP
Yellowness Index: ≤1.0
Median Particle Size: 300 micron
Apparent Density/ Bulk Density: 0.44 g/cc
PVOH2588 is a medium viscosity (25 cPs), Partially hydrolyzed (88%) plastic that can dissolve in warm or room temperature water.
PVOH2588 compares to Elvanol® 52-22, Poval 26-88, Selvol 523 and PVA-217.
Applications include the manufacture of spiral wound tubes, coated paper and linerboard, and specialty water-soluble films. Its higher binding capacity versus synthetic latex and starch make it attractive for use in coatings. It adds strength in recycle board and adds barrier properties for improved oil and grease resistance. It is also suggested for evaluation in the stabilization of vinyl acetate, polystyrene and polyvinyl chloride emulsions. It has additional applications in remoisturizing adhesives, temporary binder for ceramics, water-soluble film, paper adhesives, cold-water-soluble film, photosensitive coatings, binder for joint compounds and textile coatings, and as a soil anti-redeposition agent.
Well dried natural pine rosin is crushed to fine granular and powder to create dust in baseball bags and aquatint box.
100% natural, no additives or diluent.
This starch is modified so that it can dissolve in water easily and at high concentration. It is used to make laundry starch and starch based glues such as those used on the back of the stamps.
Starch based glues are highly demanded due to their safety when handled by children. They are also washable easily if they spill on the floor or on clothing.
For many years starch based glues have been the only or the predominant type of glue used at homes and offices. This trend changed after invention of polymers such as white glue (Polyvinyl acetate).
Starch based glues can also be mixed with pigments to make water colors. This starch can dissolve in water to create a high viscosity clear glue after heating and stirring.
The price is less than $1 per pound for pallet quantities. 1-lb containers are provided only for test and evaluation.
Can be used to produce solutions of 5% (for spraying) up to 50% (for glue).
Microcrystalline Cellulose is a purified, partly depolymerised cellulose with shorter, crystalline polymer chains. Its strong binding performance make MCC one of the most commonly used excipients (diluents, fillers and binders) in drug formulations. The product is manufactured by controlled partial hydrolysis of high purity wood pulp, followed by purification and drying.
MCC is widely used in diverse pharmaceutical processes, like wet granulation, dry granulation or direct compression.
Particle Size Distribution:
D10: 15-30 um
D50: 45-80 um
D90: 100-170 um
Grade: USP/NF/KOSHER in 55-Lb bags/boxes
Keyword: Cellulose Powder
Carnauba wax flakes is a hard wax that provides lustrous gloss properties to many commercial wax formulations.
Our top quality food/cosmetic grade Carnauba Wax is an all vegetable derived, hard, brittle, light yellow wax in a flake form.
Used in production of polishing waxes for shoe, Furniture, Leather, Automobile, Floor, Fruit, and wood products.
Also used in cosmetics such as Creams, Lip balms and Lipsticks, Hair Care Products, Mascara.
Used in lubricants such as Greases and Mold Release.
Used as Glazing agent in Candies, Gum, fruits and Paper.
Used in Protective Coatings such as Varnishes, Lacquers, Enamels
Used in Pharmaceutical: Salves, Ointments, Tablet Coating, Time Release Agents
Other Uses: Candles, Inks
Carnauba Wax is F.D.A. Approved under Regulation 21 CFR 175.320, 184.1978 C.T.F.A. Listed C.A.S. #8015-86-9
Carnauba wax flakes is a hard wax that provides lustrous gloss properties to many commercial wax formulations.
Our high quality cosmetic/ industrial grade Carnauba Wax is an all vegetable derived, hard, brittle, amber-color wax in a flake form.
Used in production of polishing waxes for shoe, Furniture, Leather, Automobile, Floor, Fruit, and wood products.
Also used in cosmetics such as Creams, Lip balms and Lipsticks, Hair Care Products, Mascara.
Used in lubricants such as Greases and Mold Release.
Used as Glazing agent in Candies, Gum, fruits and Paper.
Used in Protective Coatings such as Varnishes, Lacquers, Enamels
Used in Pharmaceutical: Salves, Ointments, Tablet Coating, Time Release Agents
Other Uses: Candles, Inks
Carnauba Wax is F.D.A. Approved under Regulation 21 CFR 175.320, 184.1978 C.T.F.A. Listed C.A.S. #8015-86-9
Carnauba wax flakes is a hard wax that provides lustrous gloss properties to many commercial wax formulations.
Our basic quality industrial grade Carnauba Wax is an all vegetable derived, hard, brittle, dark brown color wax in a flake form.
Used in production of polishing waxes for shoe, Furniture, Leather, Automobile, Floor, Fruit, and wood products.
May be used in cosmetics such as Creams, Lip balms and Lipsticks, Hair Care Products, Mascara.
Used in lubricants such as Greases and Mold Release.
May be used as Glazing agent in Candies, Gums
Used in Protective Coatings such as Varnishes, Lacquers, Enamels
Used in Pharmaceutical: Salves, Ointments, Time Release Agents
Other Uses: Candles, Inks
Carnauba Wax is F.D.A. Approved under Regulation 21 CFR 175.320, 184.1978 C.T.F.A. Listed C.A.S. #8015-86-9
This product is a fine powder containing about 80% natural dry pine rosin and about 20% calcium carbonate. It is used as a grip improving powder for industrial applications.
1-lb jars are actually 32 ounces of powder by volume. Actual weight is about 1-lb.
We don’t overstock this product so that we can always ship you a fresh product. Lead time is 7 days.
Storage: Avoid exposure to heat and direct sunlight.
Shelf life: about 1 year from the shipping date.
This is a special order product where the customer provides fumed silica to be blended with micronized rosin powder. At least 6 lbs of fumed silica is required for 100 lbs of this product. Shortage of silica may result clump formation. Please call in advance prior to ordering this product.
Guar Gum is derived from the ground endosperm of Cyamopsis Tetragonolobus, a plant of the Leguminosae family. Guar Gum extracted from Guar beans.
PHYSICAL DESCRIPTION: Off-white to yellowish-white powder. Five to eight times the thickening power of starch. Water solutions are tasteless, odorless, and nontoxic and have a pale translucent gray color with neutral pH. Water solutions converted to gel by small amounts of borax.
Rosin Flakes, crushed or clumps also known as colophony, light yellow-amber color, is a solid form of resin obtained from pines. Used in printing inks, varnishes, adhesives/glues, soap, paper sizing, soda, soldering fluxes, sealing wax and depilatory wax known as hard wax.
AA59142-AIWW: Complies with Class A, Type I, Grade WW Mil. Spec. A-A-59142.
Extracted from pine tree species known as Pinus Elliottii, commonly known as the slash pine.
HROSIN is colophony or gum derived from pine tree species known as Pinus Oocarpa in Honduras. It is produced by heating fresh liquid resin to vaporize the volatile liquid components. It is semi-transparent pine rosin and varies in color from dark yellow to light brown.
HROSIN Contain about 10% natural nsaponifiable matter that provide anticrystalline properties to the rosin and its compounds.
Main applications include adhesives, chewing gums, coatings, cosmetics, linoleum, paints, printing inks, resins, rubber, sizes, varnishes.
Rosin Lumps or rock rosin also known as colophony is a solid form (amber-brown color) of resin obtained from pines. Used in printing inks, varnishes, adhesives/glues, soap, paper sizing, soda, soldering fluxes, and sealing wax. Grade WW is pale yellow. Grade WG is yellow.
Partially hydrogenated gum Rosin has a lighter color and is more stable.
Hydrogenated rosin has more resistance to oxidation and has lighter color.
Like unmodified pine rosin, hydrogenated rosin have a wide span of compatibility with almost all polymers. They are well known for their peel and tack contribution to the adhesive. Specific benefits of hydrogenated rosin include:
Lighter color.
Significantly improved stability.
Less to no skin sensitization (depends on the degree of hydrogenation).
Less UV absorption, thus making them suitable for UV curable polymer based adhesives.
Imparts only a slight decrease of cohesive strength, especially in block co-polymer systems.
Can be used in amorphous polyolefin based adhesives.
CAS Number: 65997-06-0
PVOH 49-88 is a high viscosity partially hydrolyzed polyvinyl alcohol resin. This product is equivalent to PVOH5042, Elvanol® 50-42, SELVOL 540 and POVAL 49-88). PVOH4988 can dissolve in cold water (Heating or warm water is suggested for complete dissolving).
A solution of 4% provides the maximum viscosity of 47 CPS.
It offers high tensile strength and tear resistance. It is an excellent dispenser and stabilizer.
Click here to see the new product code and available packaging sizes.
PVOH 30-99 (Elvanol® 71-30) is a medium viscosity, fully hydrolized grade of polyvinyl alcohol. White, powder, soluble in hot water but insoluble in cold water and common organic solvents. For most applications, PVOH 30-99 is prepared in water solutions. On evaporation of water, transparent films are formed which have high tensile strength and tear resistance. The binder characteristics of PVOH 30-99 offer excellent adhesion to porous, hydrophilic surfaces. Used as sizing agent for paper, textile, ceramic fiber,.... Wall paper glue.
Solution of PVOH may be applied by brush, paint roller or with spray equipment.
Industries: Paper, Adhesives, Personal Care, Oil & Gas, Emulsion, Construction, Textile.
Unavailable!
We are in process of replacing this product with a natural alternative.
Synthetic Rosin powder. tasteless, odorless, Chlorinated paraffin resins especially soluble in aromatic and chlorinated solvents.
Used as a grip-improving powder. Apply to athletes’ hands or soles of basketball shoes for improved traction. Dust on handles of baseball and softball bats for improved grip.
Improves grip and prevent slipping of rubber belts (conveyer belts).
WARNING: Cancer and Reproductive harm - www.P65Warnings.ca.gov.
Natural Rosin, powdered.
Used as a grip-improving powder. Apply to athletes’ hands or soles of basketball shoes for improved traction. Dust on handles of baseball and softball bats for improved grip.
Silicone Oil, 1000 Cst, is a Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1000 mm2/s. Due to its chemical structure, AK1000 silicone fluid has an outstanding property profile, which sets it apart from organic materials such as mineral oils.
Applications include: Lubricant and Anti-friction Agents, Release Agents (Molds), Surface care/ Polishes, Hydraulic and transformer fluids, Damping fluids, Diffusion pump fluids, Heat-resistant lubricants, Dielectrics, Release agents for high-performance digital-printing machines, Defoaming (Oil/Gas/Diesel), Automotive care (Paint),
light lubricant that can be sprayed).
Used for treadmills by itself or mixed with AK350.
Our silicone fluid products are mainly manufactured or marketed by companies or brands such as Dow Corning Chemicals, Shin-Etsu, and WACKER. Our product codes however are similar to the WACKER brand codes.
Silicone Oil, 12500 Cst, is a non-reactive polydimethylsiloxane with a viscosity of approx. 12500 mm2/s. Due to its chemical structure, AK12500 silicone fluid has an outstanding property profile, which sets it apart from organic materials such as mineral oils with the same viscosity.
Applications include: Lubricant, Release Agents (Molds), Surface care/ Polishes, Hydraulic and transformer fluids,
Damping fluids, Diffusion pump fluids, Heat-resistant lubricants, Dielectrics, Release agents for high-performance digital-printing machines, Defoaming (Oil/Gas/Diesel), Automotive care (Paint),
Our silicone fluid products are mainly manufactured or marketed by companies or brands such as Dow Corning Chemicals, Shin-Etsu, and WACKER. Our product codes however are similar to the WACKER brand codes.
Silicone Oil, 350 Cst, is a Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 350 mm2/s. Due to its chemical structure, AK350 silicone fluid has an outstanding property profile, which sets it apart from organic materials such as mineral oils.
Applications include: Lubricant and Anti-friction Agents, Release Agents (Molds), Surface care/ Polishes, Hydraulic and transformer fluids, Damping fluids, Diffusion pump fluids, Heat-resistant lubricants, Dielectrics, Release agents for high-performance digital-printing machines, Defoaming (Oil/Gas/Diesel), Automotive care (Paint),
light lubricant that can be sprayed).
Used for treadmills by itself or mixed with AK1000.
Our silicone fluid products are mainly manufactured or marketed by companies or brands such as Dow Corning Chemicals, Shin-Etsu, and WACKER. Our product codes however are similar to the WACKER brand codes.
Please see more details below the prices.
QuickLinK
